The Due is Arduino's first ARM-based Arduino development board. This board is based on a powerful 32bit CortexM3 ARM microcontroller made programmable through the familiar Arduino IDE. It increases the computing power available to Arduino users keeping the language as compatible as possible so that many programs will be migrated in a matter of minutes! The Arduino Due has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), an 84 MHz clock, a USB-OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button. There are also some cool features like DACs, Audio, DMA , an experimental multi tasking library and more. To compile code for the ARM processor, you'll need the latest version of the Arduino IDE: v1.5 (After a period of testing and debugging this will replace the 1.0.1 IDE altogether) Because of the limitations of system voltage imposed by the Atmel SAM3X8E, Arduino shields that are based on the 5v models won't work properly. All the shields that fully implement the Arduino R3 layout are compatible straight away (like the Arduino WiFi shield and Ethernet Shield) but other shields might not be compatible. Be careful when you're plugging stuff in! Note: Unlike other Arduino boards, the Arduino Due board runs at 3.3V. The maximum voltage that the I/O pins can tolerate is 3.3V. Providing higher voltages, like 5V to an I/O pin could damage the board. Fitur Microcontroller: AT91SAM3X8E Operating Voltage: 3.3V Recommended Input Voltage: 7-12V Min-Max Input Voltage: 6-20V Digital I/O Pins: 54 (of which 12 provide PWM output) Analog Input Pins: 12 Analog Outputs Pins: 2 Total DC Output Current on all I/O lines: 130 mA DC Current for 3.3V Pin: 800 mA DC Current for 5V Pin: 800 mA Flash Memory: 512 KB all available for the user applications SRAM: 96 KB (two banks: 64KB and 32KB) Clock Speed: 84 MHz Link Dokumen Schematic Eagle Files Arduino v1.5 Beta Arduino Page

Introduction The Arduino Wireless SD Shield provides a 3.3v regulated Digi Xbee slot for easy wireless connectivity, a uSD (micro Secure Digital) slot for onboard storage capabilities, and a compact prototyping board area for custom additions. Transmission LED indicator lights, a reset button, and serial select switch are also available for your convenience. Passthrough headers allow for additional Shields to be stacked on top. Specification 2.72x2.21x0.91"(69.3x53.8x23.4mm) Xbee adapter MicroSD slot Documentation Official Arduino Wireless Page Easy-to-use Wireless library Shipping List Arduino wireless sd shield(1 unit)

Product | Microcontrollers | ArduPilot -UAV Controller w/ ATMega328 ArduPilot -UAV Controller w/ ATMega328 0 next item previous item go back ArduPilot -UAV Controller w/ ATMega328 Product ID :42087 Quantity : Hits : 2360 RoHS: Price : US$25.98 add to wish list Share/Save/Bookmark Description Comments Write Review Video ArduPilot - Arduino Compatible UAV Controller w/ ATMega328 ArduPilot Description : ArduPilot is a fully programmable autopilot that requires a GPS module and infrared XY and Z sensors to create a functioning Unmanned Aerial Vehicle (UAV). The autopilot handles both stabilization and navigation, eliminating the need for a separate stabilization system. It also supports a "fly-by-wire" mode that can stabilize an aircraft when flying manually under RC control, making it easier and safer to fly. The hardware and software are all open source. The board comes with all the surface-mount parts already soldered, but requires the user to solder on connectors. Firmware is already loaded, but the autopilot software must be downloaded and loaded onto the board by the user. It can be programmed with the Arduino IDE. All details and instructions can be found at the project's home page. ArduPilot features : 1、Built-in hardware failsafe that uses a separate circuit (multiplexer chip and ATTiny processor) to transfer control from the RC system to the autopilot and back again. 2、Altitude hold using throttle or elevator and GPS altitude data 3、Includes ability to reboot the main processor in mid-flight. 4、Multiple 3D waypoints (number only limited by memory; currently can support at least 200) 5、Comes with a 6-pin GPS connector for the 1hz EM406 GPS module. Faster 5hz GPS modules, such as the uBlox 5 series, are supported via an optional 3.3v daughterboard. 6、Has six spare analog inputs (with ADC on each) and six spare digital input/outputs to add additional sensors 7、Supports addition of wireless downlink module for telemetry. 8、Based on a 16MhZ Atmega328 processor. Total onboard processing power aprox 24 MIPS. 9、Very small: 30mm x 47mm 10、Can be powered by either the RC receiver or a separate battery 11、Has an efficient ASCII NMEA parser for compatibility with standard GPS modules at any baud speed. 12、Hardware-driven servo control (using the Arduino Servo Timer library), which means less processor overhead, tighter response and no jitters. 13、Four RC-in channels (plus the autopilot on/off channel) can be processed by the autopilot. 14、Status LEDs for power, failsafe (on/off) and GPS (satellite lock).

Features : 1、Arduino Compatible! 2、Comes pre-soldered (with straight pins) and tested. 3、Includes 3-axis gyro, accelerometer and magnetometer, along with a high-performance barometer 4、Onboard 4 MP Dataflash chip for automatic datalogging 5、Digital compass powered by Honeywell's HMC5883L-TR chip, now included on the main board. 6、Optional off-board GPS, Mediatek MT3329 or uBlox LEA-6H module (Mediatek included in base price; choose options at right subtract $20 for no GPS or add $50 for the better uBlox module). 7、One of the first open source autopilot systems to use Invensense's 6 DoF Accelerometer/Gyro MPU-6000. 8、Barometric pressure sensor upgraded to MS5611-01BA03, from Measurement Specialties. 9、Atmel's ATMEGA2560 and ATMEGA32U-2 chips for processing and usb functions respectively. Please notice that this is ArduPilot Mega 2.5 Fully Assembled Kit With GPS.

The Dreamer Nano V4.0 is a surface mount breadboard embedded version of the ATMEGA 32U4 with integrated Micro USB. It has everything that Arduino Leonardo has (electrically).Physically, it is just missing power jack to save space. Using the ATmega32U4 as its sole microcontroller allows it to be cheaper and simpler. Also, because the 32U4 is handling the USB directly, code libraries are available which allow the board to emulate a computer keyboard, mouse, and more using the USB-HID protocol! The Dreamer Nano v4.0 is compatible with most Nano shield in the market. It's suitable for projects that require a compact size controller system. Note: The pins supporting I2C/TWI is located at digital pins D2(SDA) and D3(SCL). Specification Microcontroller:ATmega32u4 Operating Voltage:5V Input Voltage (recommended):6.5-12v (VIN) / 5v (Micro USB) Input Voltage (limits):6.5-12V Digital I/O Pins:20 PWM Channels:7 Analog Input Channels:12 DC Current per I/O Pin:40 mA DC Current for 3.3V Pin:50 mA Flash Memory:32 KB (ATmega32u4) of which 4 KB used by bootloader SRAM:2.5 KB (ATmega32u4) EEPROM:1 KB (ATmega32u4) Clock Speed:16 MHz Compatible with most of Nano shield Size: 45x20x20mm Shipping List Dreamer Nano V4.0 1 unit Documents Dreamer Nano 4.0 Wiki Dreamer Nano 4.0 schematic Dreamer Nano 4.0 Layout and Dimension Arduino Leonardo versus Uno – What’s new Arduino Leonardo product page Arduino IDE Atmega32u4 datasheet

DSO Nano v2 is a Digital Storage Oscilloscope designed for basic electronic engineering tasks. Within its smart shell, the device runs on ARM Cortex™-M3 32 bit platform, provides basic waveform monitoring with extensive functions. It equips 320*240 color LCD, micro SD card storage, portable probes, LiPo Battery, USB connection and signal generator. Due to palm size and handy performance, it fits in-field diagnosis, quick measurement, hobbyist projects and wherever convenience matters. Scheme and source files are also open for re-innovating. Features Portable and lightweight Color display Waveform storage and playback 6 triggering mode 200Khz Analog Bandwidth Complete measurement markers and signal characteristic Built-in Signal Generator Built-in Battery. The DSO is ready to work. Accessories available Open Source Package list: DSO Nano V2 X1 Probe X1 Test Probe X1 Screw driver X1 Bag X1 Stand X1 Note -Mini USB cable is not included. You may need to buy one to charge up the DSO. -You many need a 2G Micro SD card to store the wave signal.

Running Android 4.0, the MK802 A10 Mini PC is designed for versatility and convenience. The tiny 200 gram PC can plug directly into any HDMI output for an on the go media player, internet browser, game machine or for project. DFRobot's geek engineer has sucessfully install Ubuntu on this tiny but yet powerful computer and connect Arduino without any problem. This opens a new windows for the usbility of this computer and makes it a perfect brain for almost every project. And don't forget that this computer comes with a build in wifi which gives nearly every project the cability of being wireless. Specification CPU: A10 1.0GHz Cortex GPU: 500MHz GPU: 2D / 3D / OpenGL ES2.0 (AMD Z430) / OpenVG1.1 (AMD Z160) @ 27M Tri/s Operating System: Android 4.0/Ubuntu DDR RAM: 1GB DDR3 Nand Flash: 4GB (1GB used by system) Network Wireless: 802.11b/g, WAPI (Ralink8188) Storage External: storage via USB and microSD USB Interface: USB 2.0 host x 2, USB storage device Video formats and decoders MKV, TS, TP, M2TS, RM, RMVB, BD-ISO, AVI, VOB, DAT, ASF, TRP, FLV, WMV, ASF, MP4, 3GP, MPEG 1/2/4, H.264, H.263, VC-1, DivX, Xvid, MJPEG, RV10 Audio formats AAC, AAC+, eAAC+, AMR-NB, AMR-WB, QCP, MP3, WMA, WAV, MIDI, M4A Video output Available in Android: 720P, 576P, 480P Hardware support but not in Android yet: 1080P, Super HD 2160P, 3D Film Interfaces: HDMI1, USB-HOST, USB OTG (plugging external devices into the MK802), microSD Image formats: JPG, BMP, GIF, TIFF, PNG Subtitle formats: SRT, SUB, IDX, SSA, SMI Power adapter: External adapter 5V/2A output, 110-240V input, two wire US plug Dimensions: 88.5 x 35 x 13.4 mm Weight: 300 grams with accessories Shipping List 1xMK802 device (1G DDR) 1x5V@2A charger 1xHDMI cable, 1xUSB cable 1xUSB adapter. Media Press Engadget Report Install Kinect on MK802 Install ubuntu on MK802 Make MK802 Airplay Compatible

Raspberry Pi Type B Plastic Case Pre-cut to fit the Type B Raspberry Pi, connectors, and SD card Moulded two piece design Rubber feet Dimensions 100 x 64 x 30 mm Made in the UK

The Raspberry Pi is a credit-card sized computer that plugs into your TV and a keyboard. It’s a capable little PC which can be used for many of the things that your desktop PC does, like spreadsheets, word-processing and games. It also plays high-definition video. We want to see it being used by kids all over the world to learn programming. Note: Per 15th October 2012, the Raspberry Pi Model B (Rev2) ships with 512MB RAM. Spesifikasi Chip: Broadcom BCM2835 (CPU, GPU, DSP, and SDRAM) CPU: 700 MHz ARM1176JZF-S core (ARM6 family) GPU: Broadcom VideoCore IV, OpenGL ES 2.0, 1080p30 h.264/MPEG-4 AVC high-profile decoder Memory (SDRAM): 512 MB (shared with GPU) USB 2.0 ports: 2 (via integrated USB hub) Video outputs: Composite RCA (PAL & NTSC), HDMI (rev 1.3 & 1.4), raw LCD Panels via DSI 14 HDMI resolutions from 640×350 to 1920×1200 plus various PAL and NTSC standards. Audio outputs: 3.5 mm jack, HDMI Onboard storage: SD / MMC / SDIO card slot Onboard network: 10/100 Ethernet (RJ45) Low-level peripherals: 8 × GPIO, UART, I²C bus, SPI bus with two chip selects, +3.3 V, +5 V, ground[58][63] Power ratings: 700 mA (3.5 W) Power source: 5 volt via MicroUSB or GPIO header Size: 85.60 × 53.98 mm (3.370 × 2.125 in) Weight: 45 g (1.6 oz) Planned operating systems: Debian GNU/Linux, Fedora, Arch Linux ARM, RISC OS Link Dokumentasi Raspberry Pi - Website Raspberry Pi - Quick Start Guide Raspberry Pi - Download Raspberry Pi - FAQs Raspberry Pi - Forum Raspberry Pi - Video Tutorial

This is a very affordable 24Mhz 8 Channel USB Logic analyzer. This is a hobbyist level analyzer, ideal for testing your Arduino or other hobbyist microcontroller's communications. A logic analyzer is a must have tool for any serious electronics hobbyist. With a logic analyzer it is possible to see a visual representation of the zeros and ones that are flashing by between two components. A logic analyzer is different from an oscilloscope because the analyzer allows you to capture the data on a PC for a more detailed analysis of the data which is being transmitted and received. This logic analyzer supports 10 different communications standards (see Specifications below). with 8 channels it will allow you to monitor upto 8 differnet wires. So on an Arduino you could monitor the Serial port (tx/Rx pins), the I2C port (pins A4, A5), and the SPI port (pins 10, 11, 12, and 13) all at the same time. Specifications 8 Channels Supports triggering (rising, high, falling, low) Up to 24Mhz sampling Up to 10 Billion samples Max Voltage: 5.25Vdc supports: CAN DMX-512 I2C I2S/PCM Manchester 1-Wire Async Serial Simple Parallel SPI UNI/O Fully compatible with the Saleae Logic software Shipping List Logic Analyzer (1 unit) Mini USB Cable (1 unit) Jumper wire (10 units) Documents wiki Hack A Day- Saleae Logic Salae logic software

Modul mikrokontroler Arduino yang berbasis ATmega328. Spesifikasi : - Catu daya : 7VDC - 12VDC - Berbasis mikrokontroler/mikroprosesor : ATmega328 - Jumlah port I/O : 14 pin digital I/O (6pin untuk output PWM), 6 pin input analog - Port antarmuka : UART TTL, I2C, SPI, USB (Virtual Com) - Bootloader : Internal - Port pemograman : USB - Fitur : Dilengkapi dengan pengaman arus berlebih di port USB yang berfungsi melindungi PC/Komputer dari kerusakan. Data sheet www.arduino.cc

Specification Input Voltage (recommended): 7-12V Input Voltage (limits): 6-20V Microcontroller:ATmega32u4 Operating Voltage: 5V Interface: Micro USB Digital I/O Pins: 20 PWM Channels: 7 Analog Input Channels: 12 DC Current per I/O Pin: 40 mA DC Current for 3.3V Pin: 50 mA Flash Memory 32 KB (ATmega32u4) of which 4 KB used by bootloader SRAM: 2.5 KB (ATmega32u4) EEPROM: 1 KB (ATmega32u4) Clock Speed 16 MHz Size: 70x55x14mm Shipping List Arduino Leonardo with headers (1 unit) Documents Atmega32u4 datasheet Schematic Leonardo Eagle files Product Page Arduino Site Arduino Forum Leonardo mouse effect vedio (DFRobot)

The name says it all on this one. An ATmega328 in DIP package, pre-loaded with the Arduino UNO (16MHz) Bootloader. This will allow you to use Arduino code in your custom embedded project without having to use an actual Arduino board. To get this chip working with Arduino IDE, you will need an external 16MHz crystal or resonator, a 5V supply, and a serial connection. If you are not comfortable doing this, we recommend purchasing the Arduino Duemilanove board that has all of these built into the board. Atmel's ATMega328 8-Bit Processor in 28 pin DIP package. It's like the ATmega168, with double the flash space. 32K of program space. 23 I/O lines, 6 of which are channels for the 10-bit ADC. Runs up to 20MHz with external crystal. Package can be programmed in circuit. 1.8V to 5V operating voltage! Documents Arduino Home Page Programming Reference Atmel Datasheets Tersedia juga Chip ATMEGA328 tanpa boothloader d

Mikrokontroler 8/16-bit keluarga AVR Spesifikasi: - Catudaya : 1,6VDC – 3,36VDC - 128K Byte In-System Self-Programmable Flash - 2K Byte EEPROM - 8K Byte SRAM - 4 kanal DMA controller - 8 kanal event system - 8 kanal Timer/Counter 16-bit - 1 kanal Timer/Counter 16-bit - 8 kanal USART - 4 kanal I²C - 4 kanal SPI - AES and DES crypto engine - 2 x 8 kanal ADC 12-bit - 2 x 2 kanal DAC 12-bit - 4 kanal analog comparator - 78 jalur I/O - Frekuensi osilasi : 32MHz - Kemasan : TQFP 100-lead

This module features the MSGEQ7 graphic equalizer display filter.It will give your arduino ears. Sound is broken down into seven frequency bands and the peak level for each band can be read. The seven frequencies measured are as follows: 63Hz, 160Hz, 400Hz, 1kHz, 2.5kHz, 6.25kHz and 16kHz. This module can be used to create sound visualizers, detect patterns in music or add sound activation to your microcontroller. Applications Detect patterns in music - make a robot dance! Process the values read, then display on LEDs as a soothing visualization which changes with the music. Pimp the interior lighting in your car so it pumps to the beat and twinkles to the high hats. Create / listen for fingerprints in certain sounds - voice analysis. Specification Voltage:5V Size:30x20mm Weight: 5 grams Shipping List Audio Analyzer Module(1 Unit) Analog Cable(2 units) Digital Cable(1 unit) Documents Wiki MSGEQ7 Data Sheet Wiring Diagram Sample code/Library Zip File (Includes all of the above)

Introduction The DFduino Pro Mini V1.2(Arduino Pro Mini Compatible) is a microcontroller board based on the ATmega328.It is a 5V DFduino using a 16MHz bootloader (select 'Arduino Duemilanove w/ 328' within the Arduino IDE). It is an advance version of the offical Arduino Pro Mini. The DFRduino Pro mini has 8 analog inputs compared with the offical version which only has 6. The rest is exactly the same. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 8 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers. A six pin header can be connected to an FTDI cable or DFRobot breakout board to provide USB power and communication to the board. The DFRduino Pro Mini is intended for semi-permanent installation in objects or exhibitions. The board comes without pre-mounted headers, allowing the use of various types of connectors or direct soldering of wires. The pin layout is compatible with the Arduino Mini. Specification ATmega328 running at 16MHz with external resonator (0.5% tolerance) Low-voltage board needs no interfacing circuitry to popular 3.3V devices and modules (GPS, accelerometers, sensors, etc) No USB connection (Must useo FTDI to program or interface with PC) Supports auto-reset 3.3V regulator Max 150mA output Over current protected Reverse polarity protected DC input 3.6V up to 8V On board Power and Status LEDs Size:0.7x1.3" (18x33mm) Shipping List DFRduino Pro Mini V1.2(1 unit) Documents Schematic Getting Started Tutorial

Introduction This is the DFRduino Uno V3.0 from DFRobot. It is fully compatible with Arduino UNO R3. This board features the ATmega16U2 programmed as a USB-to-serial converter. An added bonus is that our DFRduino is still using the DIP package AVR Chip, which means you can remove it to update/reprogram the chip's firmware, or even to place it on a finished, more compact project. The cool thing about our new DFRduino microcontroller is that the headers use different colors to feature I/O ports of different types, red for Power Section, blue for Analog I/O, green for Digital I/O. These colors match our sensor cables. This makes it really easy to figure out where to connect sensors, or to identify which side is Analog(blue) or Digital (green). Arduino is an open-source physical computing platform based on a simple i/o board and a development environment that implements the Processing/Wiring language. Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP). The open-source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux). The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. This board added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible both with the board that use the AVR, which operate with 5V and with the Arduino Due that operate with 3.3V. The second one is a not connected pin, that is reserved for future purposes. Specification Microcontroller:ATmega328 (DIP Package) Operating Voltage:5V Input Voltage (recommended):7-12V Input Voltage (limits):6-20V Digital I/O Pins:14 (of which 6 provide PWM output) Analog Input Pins:6 DC Current per I/O Pin:40 mA DC Current for 3.3V Pin:50 mA Flash Memory:32 KB of which 2KB used by bootloader SRAM:2 KB (ATmega328) EEPROM:1 KB (ATmega328) Clock Speed:16 MHz Size:75x54x15 mm Envionment Friendly: Rohs Compliance Shipping List DFRduino Uno V3.0 (1 unit) Documents ATmega328P datasheet Arduino Home Page How to Programming Reference Tags: ATmega16u2, Uno, Microcontroller, ATmega328, DFR0216, DFRduino, Arduino,

This fantastic light disc consists of 7 SMD RGB LED. It illustrates a beautiful color combination much better than traditional RGB led. You can control the LEDs via the RGB pins. By pulse-width-modulating the pins any color can be created by mixing different amounts of red, green, and blue. Running from a 5V source, these LEDs are painfully bright. With a proper case, a beautiful mood light is just up and running. Ideal for Arduino lighting project. It can be powered by Arduino Digital Pin out with only USB power supply. It has buildin resistor, it will work flawlessly with Arudino 5V power. The image above is using this light disc with a glass cover, with proper sensor, you can make your own mood light or music light Specification Power Supply: 5V Current Consumption: 60mA each with 420mA in total 7 SMD RGB LED 6000 mcd Documents Wiki

Specification: Stamp Module Dimension: 63 x 52 mm CPU: 400 MHz Samsung S3C2440A ARM920T (max freq. 533 MHz) RAM: 64 MB SDRAM, 32 bit Bus Flash: 64 MB / 128 MB / 256 MB / 1GB NAND Flash and 2 MB NOR Flash with BIOS Serial, SPI, USB, LCD, CMOS Camera Interface Analog Input and Output User Outputs: 4x LEDs Expansion headers (2.0 mm) Debug: 10 pin JTAG (2.0 mm) OS Support Windows CE 5 and 6 Linux 2.6 Android

FriendlyARM Mini 2440 SBC (Single-Board Computer) with 400 MHz Samsung S3C2440 ARM9 processor. The board measures 10 cm x 10 cm, ideal for learning about ARM systems. Mini2440 Schematics Specification Dimension: 100 x 100 mm CPU: 400 MHz Samsung S3C2440A ARM920T (max freq. 533 MHz) RAM: 64 MB SDRAM, 32 bit Bus Flash:128 MB / 256 MB / 1GB NAND Flash and 2 MB NOR Flash with BIOS EEPROM: 1024 Byte (I2C) Ext. Memory: SD-Card socket Serial Ports: 1x DB9 connector (RS232), total: 3x serial port connectors USB: 1x USB-A Host 1.1, 1x USB-B Device 1.1 Audio Output: 3.5 mm stereo jack Audio Input: Connector + Condenser microphone Ethernet: RJ-45 10/100M (DM9000) RTC: Real Time Clock with battery Beeper: PWM buzzer Camera: 20 pin Camera interface (2.0 mm) LCD Interface STN Displays TFT Displays 41 pin connector for FriendlyARM Displays (3.5" and 7") and VGA Board Touch Panel: 4 wire resistive User Inputs: 6x push buttons and 1x A/D pot User Outputs: 4x LEDs Expansion: 40 pin System Bus, 34 pin GPIO, 10 pin Buttons (2.0 mm) Debug: 10 pin JTAG (2.0 mm) Power: regulated 5V (DC-Plug: 1.35mm inner x 3.5mm outer diameter) Power Consumption: Mini2440: 0.3 A, Mini2440 + 3.5" LCD: 0.6 A, Mini2440 + 7" LCD: 1 A OS Support Windows CE 5 and 6 Linux 2.6 Android Status ready stock

FriendlyARM Mini 2440 SBC (Single-Board Computer) with 400 MHz Samsung S3C2440 ARM9 processor. The board measures 10 cm x 10 cm, ideal for learning about ARM systems. Specification Dimension: 100 x 100 mm CPU: 400 MHz Samsung S3C2440A ARM920T (max freq. 533 MHz) RAM: 64 MB SDRAM, 32 bit Bus Flash: 64 MB / 128 MB / 256 MB / 1GB NAND Flash and 2 MB NOR Flash with BIOS EEPROM: 1024 Byte (I2C) Ext. Memory: SD-Card socket Serial Ports: 1x DB9 connector (RS232), total: 3x serial port connectors USB: 1x USB-A Host 1.1, 1x USB-B Device 1.1 Audio Output: 3.5 mm stereo jack Audio Input: Connector + Condenser microphone Ethernet: RJ-45 10/100M (DM9000) RTC: Real Time Clock with battery Beeper: PWM buzzer Camera: 20 pin Camera interface (2.0 mm) LCD Interface STN Displays TFT Displays 41 pin connector for FriendlyARM Displays (3.5" and 7") and VGA Board Touch Panel: 4 wire resistive User Inputs: 6x push buttons and 1x A/D pot User Outputs: 4x LEDs Expansion: 40 pin System Bus, 34 pin GPIO, 10 pin Buttons (2.0 mm) Debug: 10 pin JTAG (2.0 mm) Power: regulated 5V (DC-Plug: 1.35mm inner x 3.5mm outer diameter) Power Consumption: Mini2440: 0.3 A, Mini2440 + 3.5" LCD: 0.6 A, Mini2440 + 7" LCD: 1 A OS Support Windows CE 5 and 6 Linux 2.6 Android

Manufacturer: Rabbit Semiconductor Product Category: Microprocessors (MPU) Modules RoHS: RoHS Compliant Details Core: Rabbit 2000 Maximum Clock Frequency: 18.432 MHz Program Memory Size: 256 KB Data RAM Size: 128 KB Memory Type: Flash, SRAM Number of I/Os: 40 Number of Timers: 6 Interface Type: Serial Operating Supply Voltage: 5 V Maximum Operating Temperature: + 85 C Dimensions: 58.4 mm x 48.3 mm x 14 mm Minimum Operating Temperature: - 40 C

STM32F407VGT6 microcontroller featuring 32-bit ARM Cortex-M4F core, 1 MB Flash, 192 KB RAM in an LQFP100 package On-board ST-LINK/V2 with selection mode switch to use the kit as a standalone ST-LINK/V2 (with SWD connector for programming and debugging) Board power supply: through USB bus or from an external 5 V supply voltage External application power supply: 3 V and 5 V LIS302DL, ST MEMS motion sensor, 3-axis digital output accelerometer MP45DT02, ST MEMS audio sensor, omni-directional digital microphone CS43L22, audio DAC with integrated class D speaker driver Eight LEDs: LD1 (red/green) for USB communication LD2 (red) for 3.3 V power on Four user LEDs, LD3 (orange), LD4 (green), LD5 (red) and LD6 (blue) 2 USB OTG LEDs LD7 (green) VBus and LD8 (red) over-current Two push buttons (user and reset) USB OTG FS with micro-AB connector Extension header for all LQFP100 I/Os for quick connection to prototyping board and easy probing

STM32F100RB microcontroller, 128 KB Flash, 8 KB RAM in 64-pin LQFP On-board ST-Link with selection mode switch to use the kit as a stand-alone ST-Link (with SWD connector) Designed to be powered by USB or an external supply of 5 V or 3.3 V Can supply target application with 5 V and 3 V Two user LEDs (green and blue) One user push button Extension header for all QFP64 I/Os for quick connection to prototyping board or easy probing Status stk

The STM32L-DISCOVERY helps you to discover the STM32L ultralow power features and to develop and share your applications. It is based on an STM32L152RBT6 and includes an ST-Link/V2 embedded debugging tool interface, an LCD (24 segments, 4 commons), LEDs, pushbuttons, a linear touch sensor or touchkeys. DATA BRIEF Key Features STM32L152RBT6 microcontroller featuring 128 KB Flash, 16 KB RAM, 4 KB EEPROM, in an LQFP64 package On-board ST-Link/V2 with selection mode switch to use the kit as a standalone ST-Link/V2 (with SWD connector for programming and debugging) Board power supply: through USB bus or from an external 3.3 or 5 V supply voltage External application power supply: 3 V and 5 V IDD current measurement LCD DIP28 package 24 segments, 4 commons Four LEDs: LD1 (red/green) for USB communication LD2 (red) for 3.3 V power on Two user LEDs, LD3 (green) and LD4 (blue) Two pushbuttons (user and reset) One linear touch sensor or four touchkeys Extension header for LQFP64 I/Os for quick connection to prototyping board and easy probing

This is a USB AVR programmer supported by offical Arduino IDE. Once the Arduino has lost its bootloader for some reasons, use this programmer to reburn the bootloader and save the dead Arduino. This programmer works really well for ATmega168 and ATmega328 and should work with all the AVR micros supported by AVRDUDE. Both 10-pin and 6-pin targets supported (cable included) which makes the progrmmer suitable for most AVR boards. This programmer is based on USBtiny code & design Version 2.0 The Kit comes with both 6-pin and 10-pin AVR-standard connectors and cables. Documents Download Arduino ISP Shipping List USBTinyISP Module 6 Pin Cable 10 Pin Calbe

Arduino Mega 1280(Arduino Mega Compatible)

AVR 128Kbytes flash, eeprom 4kbytes, 4k ram, 53 I/O, 2USART,

This is the Atmega1280 chip. It comes in 100-TQFP package which is exactly the same as the one used in Arduino Mega. And you can really solder it by your self. The high-performance, low-power Atmel 8-bit AVR RISC-based microcontroller combines 128KB ISP flash memory, 8KB SRAM, 4KB EEPROM, 86 general purpose I/O lines, 32 general purpose working registers, real time counter, six flexible timer/counters with compare modes, PWM, 4 USARTs, byte oriented 2-wire serial interface, 16-channel 10-bit A/D converter, and a JTAG interface for on-chip debugging. The device achieves a throughput of 16 MIPS at 16 MHz and operates between 2.7-5.5 volts. By executing powerful instructions in a single clock cycle, the device achieves a throughput approaching 1 MIPS per MHz, balancing power consumption and processing speed. Documents Datasheet

DFRobot Leonardo with Xbee socket is an Arduino Leonardo variant processor.The Arduino Leonardo is based on the ATmega32u4 chip. It is the latest addition to the Arduino family. Compared with the earlier Arduino controllors,by using the ATmega32U4 as its sole microcontroller, allows the Leonardo to be cheaper and simpler to use.Also, because the 32U4 is handling the USB directly, code libraries are available which allow the board to emulate a computer keyboard, mouse, and more using the USB-HID protocol! Based on the Arduino official Leonardo processor,this one from DFRobot equips an xbee socket and 3 sensor extension pins for your application.The Xbee is commonly used wireless communication module with 2.4G Zigbee,900Mhz version,and etc.The socket makes it possible for you to extend the xbee or XBee form factor wifi,bluetooth and RF modules for your Arduino directly.However,the D14~D16 extension pins with power supply maximize the use of your ATmega32u4 microcontroller.They support the digital sensors and module from DFRobot directly. Notics: This board is only supported in the latest Arduino IDE 1.0.1 or later version so you will also need to update the IDE. Specification Input Voltage (recommended): 7-12V Input Voltage (limits): 6-12V Microcontroller:ATmega32u4 Operating Voltage: 5V Interface: Micro USB Compatible with Arduino R3 series pin mapping Directly support Xbee and XBee form factor wifi,bluetooth and RF modules Extend D14~D16 digital pins with 5v power supply Clock Speed 16 MHz Size: 70x55x14mm Microcontroller Specification Digital I/O Pins: 20 PWM Channels: 7 Analog Input Channels: 12 DC Current per I/O Pin: 40 mA DC Current for 3.3V Pin: 800 mA Flash Memory 32 KB (ATmega32u4) of which 4 KB used by bootloader SRAM: 2.5 KB (ATmega32u4) EEPROM: 1 KB (ATmega32u4) Shipping List DFRobot Leonardo & Xbee R3 1unit Documents Wiki Doc Atmega32u4 datasheet Schematic Arduino Leonardo product page Latest Arduino IDE

Our IO expansion board is evolving, this latest V5 IO expansion shield is now supporting Xbee. It combines our popular Xbee shield with IO expansion shield(V4). It even supports SD card which provides the ultimate functional expansion for Arduino so far. As its predecessor, it supports RS485, APC220, Bluetooth communication, servo control. Specification Support RS485 Support Xbee (Xbee pro) Support Bluetooth Support APC220 Support SD card read/write Documents Wiki Doc Schematics Review from funnyrobotics

This is the back panel to our popular LCD Shield. This shield allows you to place your own LCD onto this shield. It only requieres a 16x2 HD44780 compatible LCD. This Shield uses Arudino LCD4Bit library. The pcb is compatible with the following LCD: Basic 16x2 Character LCD - Black on Yellow 5V Basic 16x2 Character LCD - Golden on Green 5V Basic 16x2 Character LCD - White on Blue 5V Applications This is a great shield if you have an extra LCD laying arround or want to move your current LCD from breadboard and wires to a more stable solution. Specifications Requieres the use of an 16x2 LCD Has 5 programmable buttons and 1 reset button Not Compatible with: 20 Pin LCD's Documents Manual Library Schematics

Universal Programmer untuk memprogram mikrokontroler, memori, PLD, dan menguji IC TTL/CMOS. Spesifikasi: - Menggunakan antarmuka USB. - Mendukung OS win7/ vista/Win98/Me/2000/XP. - ZIF socket 48 pin. - Built in surge protection circuit. - Dukungan divais lebih banyak (daftar lihat datasheet top2011).

Manufacturer: Rabbit Semiconductor Description: Programmer Accessories USB PROG CBL WITH 2MM CONN

Feature : Microcontroller :Atmel ATmega168 or ATmega328 Operating Voltage (logic level) :5 V Input Voltage (recommended) :7-12 V Input Voltage (limits) :6-20 V Digital I/O Pins :14 (of which 6 provide PWM output) Analog Input Pins :8 DC Current per I/O Pin :40 mA Flash Memory :16 KB (ATmega168) or 32 KB (ATmega328) of which 2 KB used by bootloader SRAM :1 KB (ATmega168) or 2 KB (ATmega328) EEPROM :512 bytes (ATmega168) or 1 KB (ATmega328) Clock Speed :16 MHz Dimensions :0.73" x 1.70" Download Software IDE Arduino Tags: Arduino Nano V3.0

Technical/Catalog Information ATMEGA128A-AU Vendor Atmel Category Integrated Circuits (ICs) Program Memory Size 128KB (64K x 16) RAM Size 4K x 8 Number of I /O 53 Package / Case 64-TQFP Speed 16MHz Oscillator Type Internal Packaging Tray Program Memory Type FLASH EEPROM Size 4K x 8 Core Processor AVR Data Converters A/D 8x10b Core Size 8-Bit Operating Temperature -40°C ~ 85°C Connectivity EBI/EMI, I²C, SPI, UART/USART Peripherals Brown-out Detect/Reset, POR, PWM, WDT Voltage - Supply (Vcc/Vdd) 2.7 V ~ 5.5 V Lead Free Status Lead Free RoHS Status RoHS Compliant